|
Drawing on our more than fifteen-year experience in designing and manufacturing of power ultrasonic equipment and basing on recomendations of technologists and medical professionals we have created ultrasonic bath of higher reliability with full control service. Bath is designed for fast and qualitative cleaning of details and pre-sterilization cleaning of medical instruments.
Bath is made of stainless steel, its volume is 14 liters, and its working frequency is 22 kHz that advantageously differs from analogs, as using of higher working frequency leads to less effective cleaning.
Following to users of different ultrasonic baths advices we have separated block of ultrasonic bath with block of ultrasonic generator and controller. Due to this technical solution possibility of water putting to bath electronics is completely excluded. This advantages our bath from all ultrasonic baths, in which electronics places in single frame with bath.
Bath is supplied with two ultrasonic transducers in order to create uniform ultrasonic field in all bath volume. Ultrasonic transducers are feed by electrical power 300 W. For improving all cleaning parameters frequency modulation of ultrasonic generator working is used. Frequency modulation of ultrasonic generator working leads to amplitude modulation of cavitation at bath - this strongly improves cleaning and removing of dirtying from object, including from inside and ulterior cavities. All discussed above allow considering possibility of qualitative pre-sterilization cleaning in short terms.
Digital timer sets operating time for bath with accuracy of 1 s. Digital timer allows operating in three modes:
|
1. |
Mode of operation for a time without heating; |
2. |
Operation by timer with switching on of heating without waiting of assigned temperature level of working liquid. |
3. |
Temperature-controlled operation mode. Thick-film heater with up to 3 kW power and heating-element made of stainless steel quickly heats working liquid (water) to assigned temperature up to +99°C with keeping at assigned level to within ±0.5°C, and after that ultrasound switches on by timer. |
Performance data: |
1. Construction |
The set IL 100-3/1 consists of bath and block of ultrasonic generator with controller. Optionally: lid, insert basket, draw-off tap. |
2. Power supply is 220±10% V, 50 Hz; power consumption: |
mode: |
heating |
up to 2 kW; |
operation |
up to 300 W. |
|
3. Operating frequency of acoustic system - 22 kHz. |
4. Overall sizes, mass: |
|
bath tank |
395x158xh220 mm, 14 liters; |
bath overall dimensions |
480x200xh375 mm; |
control block and generator |
220x240x150 mm; |
bath mass |
18 kg; |
generator mass |
3 kg. |
|
|
